Buy This Machine & Get A $200 Cash Rebate From Miller! For A Limited Time!
Take control, reduce noise and lower operating costs with Remote Start/Stop, standard on Bobcat 260 welder/generators. Easily turn your machine on and off remotely, so it only runs when you need it. Get more done with each tank of fuel, extend time between maintenance intervals and work without the hassle of walking back to your machine. The Bobcat 260 welder/generator is great for stick and flux-cored welding and designed for maintenance/repair operations, work trucks, construction, and farm/ranch.
NEW Remote Start/Stop
Take control and eliminate noise. Easily turn your Bobcat machine on and off remotely so it only runs when you need it. Get more out of each tank, extend time between maintenance and work without the hassle of walking back to your machine. The remote start/stop on Bobcat 260 welder/generators is installed and backed by Miller — so it’s just as easy to use and dependable as your Bobcat machine.
Simple: One button to start and stop the Bobcat.
Durable: Tough and water-resistant with a three-year warranty.
Two-Way Communication: After start or stop command is received by the Bobcat, the fob lights up and beeps.
Savings on Fuel and Maintenance
A Bobcat welder/generator with remote start/stop is quick and easy to turn off when it’s not being used. You spend less money on fuel, and less time and money on maintenance because there are fewer engine hours.
Jobsite Safety
The noise of a welder/generator running all day is irritating — and can even keep you from hearing sounds that warn you of potential hazards. When you turn your Bobcat off with remote start/stop, you’ll help create a safer environment by reducing the number of machines running on a jobsite and increasing your awareness of warning sounds.
Hands-Free Starting
Carbureted Bobcat welder/generators now have eChoke™ technology, which automatically sets the proper air/fuel mixture and eliminates the need to manually engage the choke, so cold-starting is now hands free. (eChoke is a trademark of Kohler Co.)
Designed for Reliability
From Appleton, Wisconsin USA, our welder/generators are the most rugged, durable and long-lasting in the industry. We manufacture them to exceed requirements for extreme working conditions and they are hard-working from the core with:
Copper windings and iron generator components for a quality-built machine
Lugged — not soldered — heavy internal leads for better field durability
Superior cooling technology for maximum performance and engine life
Protective doors to cover the weld studs and receptacles as required by OSHA and CSA for jobsite safety
Lift hook integrated into the center frame, which bolts to the machine’s base for greater durability
Small, Light Design
Bobcat welder/generators take up less space on trucks and trailers — leaving more room on your truck for other equipment and tools. Plus, they’re easy to move around jobsites — even with weld cables attached.
Easy Maintenance
With its intuitive design, the daily maintenance of our Bobcat welder/generators is fast and easy. Front panel maintenance displays help you know when your equipment needs to be serviced. And servicing is simple because of:
Oil checks that can be performed easily through the top of the machine by the access door
Toolless panels that allow for quick access
Single-side fuel fill and oil drain/filter
PROCESSES
Air Carbon Arc Cutting and Gouging (CAC-A)
Flux Cored (FCAW)
MIG (GMAW)
Stick (SMAW)
TIG AC (GTAW-AC)
TIG DC (GTAW-DC)
GENERAL SPECIFICATIONS
|
Title |
Bobcat™ 260 with Remote Start/Stop |
|
Industries Interests |
Fabrication |
|
Engine Brand |
Kohler |
|
Engine Idle Speed |
2300 RPM |
|
Engine Weld Speed |
3600 RPM |
|
Fuel Tank Size |
12 gal. |
|
Fuel Type |
Gasoline |
|
Amperage |
40 A - 260 A |
|
Horsepower |
23.5 hp |
|
Weldable Metals |
Aluminum |
|
Rated Output |
CC/AC: 225 A at 25 V, 100% duty cycle / 260 A at 25 V, 60% duty cycle; CC/DC: 260 A at 25 V, 100% duty cycle; CV/DC: 260 A at 28 V, 100% duty cycle / 275 A at 25 V, 60% duty cycle |
|
Single Phase Generator Continuous Power |
9500 W |
|
Single Phase Generator Peak Power |
11000 W |
|
Sound Rating |
72.5 dB/72 dB at max. load/150 A |
|
Current Type |
AC / DC |
|
Portability |
Lift Eye (Standard) |
|
Weld Output |
CC/CV |
|
Net Width |
20 in |
|
Net Height |
28 in |
|
Net Length |
40.5 in |
|
Net Weight |
501 lbs |