Miller Multimatic 200 Multiprocess Welder with TIG Contractor Kit 951649
Lightweight MIG, Stick and DC TIG welder. Impact-resistant case provides durability on the job. This all-in-one multiprocess
welder connects to 120 or 230 volt input power. Welds up to 3/8” mild steel. Includes TIG Contractor Kit #301287.
WHAT'S INCLUDED
- Multimatic ® 200
- Two contact tips for .030-in. (0.8 mm) wire, and two contact tips for .035-in. (0.9 mm) wire
- Multimatic 200 DC TIG Kit #301287
- RFCS-6M Foot Control - 13.25-ft.
- 10-ft. (3 m) MDX™-250 MIG gun
- 13-ft. (4 m) lead with electrode holder
- 10-ft. (3 m) work lead with clamp and 25-mm Dinse connector
- Power cord and MVP plugs for 120 and 240 V
- Argon and AR/CO2 mix regulator/flow gauge with 12-ft. (3.7 m) hose
- Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire
- Material thickness gauge #229895
- Information/settings chart and quick setup guide
Multiprocess Capabilities
MIG, flux-cored, DC stick and DC TIG processes, allowing you to build your skills.
Auto-Set™ Elite
Auto-Set Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use!
Inverter Technology
Inverter technology combines best-in-class arc characteristics with the portability of a 29-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.
Ultimate Durability
The Multimatic 200's impact-resistant case provides strength and durability, protecting the internal components and welding wire.
Excellent arc characteristics!
Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2.
Plugs in Anywhere!
Multi-voltage plug (MVP™) allows you to connect to common 120 or 230 V power receptacles without the use of any tools—choose the plug that fits the receptacle and connect it to the power cord.
Simple Aluminum Solution
Direct-connect spool guns are a reliable and economical solution for welding aluminum.
TIG Contractor Kit
The Multimatic 200 DC TIG Contractor Kit gives you everything you need for remote TIG welding with the Multimatic 200.
Fan-On-Demand
Miller's Fan-On-Demand technology operates only when needed reducing noise, power consumption and the amount of airborne contaminants pulled through the machine.
Miller's Auto-Line Technology
Provides state-of-the-art flexibility, automatically connecting to 115 or 230 VAC, single-phase power without removing the cover to re-link the power source. See how it works.
Generator Compatible
The Multimatic 200 will be able to operate and provide full output when powered by generators with 8000 Watt (8K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.
PROCESSES
- Flux Cored (FCAW)
- MIG (GMAW)
- Stick (SMAW)
- TIG (GTAW)
GENERAL SPECIFICATIONS
| Title | Multimatic® 200 Multiprocess Welder with TIG Kit |
|---|---|
| Industries Interests | Auto Repair DIY / Home Hobbyist Farm and Ranch Metal Art / Sculptures Manufacturing Racing / Customizing / Restoring Education / Training |
| Weldable Metals | Aluminum Stainless Steel Steel |
| Input Voltage | 110/115/120 V 220/230/240 V |
| Input Phase | 1-Phase |
| Input Hz | 50/60 Hz |
| Input Amperage | 18 A |
| Current Type | DC |
| Max Open Circuit Voltage | 90 VDC |
| Portability | Handle(s) |
| Net Width | 9.75 in |
| Net Height | 14.5 in |
| Net Length | 17 in |
| Net Weight | 29 lbs |
| Warranty | Miller's True Blue Warranty |