Miller Multimatic 235 Multiprocess Welder 907780
The Multimatic 235 allows welders of all skill levels to be more efficient for all their MIG, flux-cored, stick and DC TIG
welding needs. Setup is quick and easy, letting operators have faster uptime and weld with confidence.
- Power source with 7 ft. (2.1 m) power cord
- 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/ Bernard® AccuLock™ MDX consumables for .030/.035 in. (0.8/0.9 mm) wire
- 10 ft. (3 m) cable w/electrode holder & 50 mm Dinse-style connector
- 10 ft. (3 m) work cable w/clamp & 50 mm Dinse-style connector
- Flow gauge regulator and gas hose for argon or AR/CO2 mix
- Extra contact tips
- .030/.035 in. (0.8/0.9 mm) reversible drive rolls
- Material Thickness Gauge
Multiprocess Capabilities of MIG, Flux Cored, DC Lift Arc TIG and DC Pulsed TIG
4.3-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time
Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels
Portability - Machine only weighs 63 lb
Weight is reduced to make it easier to take the welder to where the work is, plus the added convenience of one machine versus two or more.
Optional EZ-Latch™ running gear
Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability
Millers Gun-On-Demand™ allows operators to simply pull the trigger on MIG gun or Spoolgun. Automatically detects and recalls the voltage, wire feed speed of the active gun.
MDX-250 MIG Gun w/ AccuLock™ MDX consumables
AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock™ MDX contact tips provide superior MIG arc performance.
The Multimatic 235 will be able to operate and provide full output when powered by generators with 10000 Watt (10K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.
- Aluminum Welding
- Flux Cored (FCAW)
- MIG (GMAW)
- Stick (SMAW)
- TIG DC (GTAW-DC)
|Title||Multimatic® 235 Multiprocess Welder - 240V|
|Material Thickness||Mild Steel 24 ga (MIG and TIG) 16 ga (Stick) - 3/8 in. (0.375 in.)|
|Input Voltage||208 V
|Input Hz||50/60 Hz|
|Max Open Circuit Voltage||54 VDC|
CV: MIG/Flux 170 Amps at 22.5 V, 60% duty cycle
CC: Stick 150 Amps at 26 V, 60% duty cycle
CC: DC TIG 180 Amps at 17.2 V, 60% duty cycle
Running Gear / Cart (Optional)
|Weld Output||CC / CV|
Miller's True Blue Warranty