Hobart Handler 210 Mig Welder W / MVP 500553

Input Power: 115/230V | Rated Output: 150 Amps at 23 Volts, 30% Duty Cycle | Output Range: 25 - 210 Amps, 115 V | Single Phase | 60 Hz

This versatile wire feed welder is capable of operating on either 115V or 230V input power. Welds up to 3/8 in. mild steel, spool gun ready for aluminum and is flux-cored or MIG ready. 

WHAT'S INCLUDED 

• Comfortable 10 ft. (3m) HR-100 gun 
• Owner's manual with installation, operation and maintenance guidelines. 
• 10 ft.(3m) work cable with clamp 
• Built-in gas solenoid value and dual-gauge regulator with gas hose 
• Spool hub assembly accommodates 4 or 8 in. spools 
• Sample spool of .030 in. self-shielding flux-cored wire 
• .030 (0.8mm) contact tips 
• Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in. 
• Power cord with 5-15 P (115 V, 15 A) and 6-50 P (230 V, 50 A) MVP (TM) plugs 
• Welding guide and material thickness gauge 

Max 210 amps in small portable case 

Sized for you to easily transport the unit to the jobsite with the power to weld 3/8 in. mild steel. 

7 (230 V) and 4 (115V) voltage settings, with infinite wire feed speed control 

Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up. 

Accepts uncomplicated, simple-to-install direct plug-in SpoolRunner 100 spool gun 

Allows you to weld aluminum with enhanced feed ability and reduction of “bird-nesting. 

Integrated spool gun control circuitry is standard 

Eliminates your need for an additional control box or adaptor to connect the SpoolRunner 100 spool gun. 

Dual-voltage capability with MVP (multi-voltage plug) 

Allows you to connect to common 115 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle. 

Door Chart with initial settings 

You are able to quickly reference initial settings for different wires, gases, materials, and thicknesses. Provides you a quick starting point whether you are a novice or professional. 

Built-in contactor 

Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe. 

Industrial cast aluminum wire drive system 

Durable wire feed provides you professional performance 

Convenient polarity changeover 

Easier and quicker for you to change polarity between solid or tubular wire. 

Quick Select drive roll 

Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire. 

Short circuit protection 

Protects unit against current overload. 

Self- resetting thermal overload protection 

Protects power transformer from thermal overload to provide you maximum reliability. 

Current-limited motor protection 

Protects wire feed system from overload, you won’t need to change or reset the circuit breaker button. 

PROCESSES 

Flux Cored (FCAW) 

MIG (GMAW) 

GENERAL SPECIFICATIONS