Miller Multimatic 255 Multiprocess Welder w/ EZ-Latch Dual Cylinder Running Gear & TIG Kit 208-575V 951768

WHAT'S INCLUDED 

• Power source with 10 ft. (3 m) industrial power cord 
• 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/Bernard® AccuLock™ S consumables for .035/.045 in. (0.9/1.2 mm) wire 
• 10 ft. (3 m) cable w/electrode holder & 50 mm Dinse-style connector 
• 10 ft. (3 m) work cable w/clamp & 50 mm Dinse-style connector 
• Flow gauge regulator and gas hose for argon or AR/CO2 mix 
• .035/.045 in. (0.9/1.2 mm) reversible drive rolls 
• Extra contact tips 
• Material Thickness Gauge 
• EZ-Latch™ dual cylinder running gear with elevated gun and cable rack 
• Multimatic 255 TIG kit 
• Two chains to secure gas cylinders
   

MDX-250 MIG Gun w/ AccuLock™ S consumables 

AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock™ S contact tips provide superior Spray and Pulsed MIG arc performance. 

2 Drive Roll Industrial Wirefeed System 

Cast Aluminum 2 Drive Roll system with interchangeable drivesrolls provides consistent wire feed from the start of the weld to the finish. 

Versatility 

Multiprocess Capabilities of MIG, Pulsed MIG, Stick (6010), DC Lift Arc TIG and DC Pulsed TIG 

Easy-to-understand interface 

7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time 

Auto-Line™ Technology 

For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–575 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. 

Pulsed MIG welding delivers higher quality 

Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past 

Auto-Set™ Elite 

Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels. 

Program mode allows easy save and recall of favorite weld settings 

Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene. 

Portability - Machine only weighs 84 lb 

Weight is reduced by more than 50 percent compared to transformer welding machines 

EZ-Latch™ Dual Cylinder Rack with Elevated Gun and Cable Rack 

Quickly disconnects from the machine and enables portability. Dual cylinder rack and storage compartment. Allows operator to easily store two gas cylinders. Includes elevated gun and cable rack to keep cables off the floor and tangle free. 

Generator Compatible 

The Multimatic 255 will be able to operate and provide full output when powered by generators with 12000 Watt (12K) output or higher. Limited output will occur when used with smaller generators. 

Specifications 

PRODUCT LITERATURE 

DC/12.9 Multimatic 255 - English 

PROCESSES 

Aluminum Welding 

Flux Cored (FCAW) 

MIG (GMAW) 

Multiprocess 

Stick (SMAW) 

TIG DC (GTAW-DC) 

GENERAL SPECIFICATIONS